Status & Control
History
General Settings
Users
Inputs
Outputs
Keypads
Areas
Schedules
Holidays
Access groups
Time & Date
Time & Date
Daylight Saving
Time Zone
Internet Time
Monitoring
IP Reporting
Dialler
Phone & Reporting
System
System
System Info
Network
Modem Info
Backup & Upload
Update
Toggle navigation
Confirm Logout ?
Dialler
Save
×
Inactivity warning
Due to inactivity, this session is about to expire
To continue, hit 'Stay Connected'
Options
Timers
Listen In
DTMF Control
Canned Messages
CID Codes
SIA Codes
MISC Options
Options A (P175E1E)
Enable Dialer
Fax Defeat
Disable Line Monitoring
Pulse Dialling
Reverse Pulse Dial
Long MF Digit Dialling
Options B (P175E2E)
Step to Next Number
Test Signals Only If Armed
Test Period in Days
Hold Line Open for Control
Ring Timeout 6.5sec
Answer After 1st Ring
Timers (P175E3E,P175E4E & P175E5E )
Answering Ring Count (0-99)
First test Message Start Time (HH:MM)
Test Message Period (0-255 hours)
Keypad Listen in Options (P175E6E)
Dialling, While Disarmed
Dialling, while Armed
Dialling, while Stay Armed
Entire Call, While Disarmed
Entire Call,While Armed
Entire Call,While Stay Armed
While Answered by System
All Times
DTMF Remote Control Codes (P175E12E,P175E13E,P175E14E & P175E15E)
Output Contol PIN Code
Microphone Contol PIN Code
Message Acknowledge Contol Code
Force Test Call Pin Code
Canned Message Reporting (P175E1-11E)
Keypad/Wireless Panic Alarm
Fire Alarm
Medical Alarm
Power Failure
Power Restore
Battery Low
Battery OK
Tamper Alarm
Duress Alarm
Juvenile Disarmed Message Number
Manual Test call Message Number
CID Reporting Codes (P175E9-11E & P177E1-6E)
Panic Alarm
Fire Alarm
Medical Alarm
Output Tamper
Output Battery
Output Trouble
Output Resync
Output Supervision
Output Override
SIA Reporting Codes (P197E1-3E & P198E1-6E)
Panic Alarm
Fire Alarm
Medical Alarm
Output Tamper
Output Battery
Output Trouble
Output Resync
Output Supervision
Output override
Secondary Phone Line (P175E7E)-
Select an output on the control panel to interrupt phone line 1 & change to another Phone line after 3 call fails
Select Output (1-32,0=Disable)
Dialling prefix-
Special Symbols = #(dial #) *(dial*) w(wait for 2 dial tones)-(2 second pause)=(5 second pause)
Dialling Prefix
Reporting Offset (P175E16 & 17E)-
Adding offset to output ID allows resuse of codes used elsewhere .I.e sharing codes between inputs and outputs.
CID Output Events
SIA Output Events