ECi

Area Assign (P121E)

Area 1 Area 2 Area 3 Area 4 Area 5 Area 6 Area 7 Area 8 Area 9 Area 10 Area 11 Area 12 Area 13 Area 14 Area 15 Area 16 Area 17 Area 18 Area 19 Area 20 Area 21 Area 22 Area 23 Area 24 Area 25 Area 26 Area 27 Area 28 Area 29 Area 30 Area 31 Area 32

Options A (P122E)

Enable Input N/O Input No Exit delay Keypad Input Wireless Input Stay Mode Input Manually Bypass Automatic Bypass

Options B (P123E)

Handover input 2 Trigger Input 24Hr Input Auto Reset Input 24Hr Fire Input Shared Input Chime Input Permanent Chime Input

Options C (P124E)

Arm If Not Ready Send Multiple Reports Sensor Watch Input Soak Test Input Report Using Highest Area Don't Report 24Hr Alarms Pulse Output On Kiss Off Exit Delay Terminator

Options D (P133E)

No Activity Monitoring No Arm Until Sealed Interlock Input

Keyswitch Options (P120E)

Arm Stay Arm Disarm Stay Disarm Security Guard Code Latchkey Mode N/O Input Momentary Input

EOL & Response (P119E, P125E & P126E)

Global EOL

EOL

Response Time

Wireless (P127E)

Wireless signal type (P6127E)

Wireless code

SH Gain

SH Pulse count

SH Fall sensitivity (MEMS)

SH Vibration sensitivity (MEMS)

SH Shock sensitivity

SH Input Select (P6280E)

SH Zone EOL (P6281E)

SH Pictures per set

SH Picture resolution

SH Picture rate

SH Picture quality

SH Supervision interval

LED enable PET mode Mute Logic AND Internal mag enable External mag enable Heat enable Smoke enable

Fall enable Vibration enable Camera enable DJPEG ratio JPEG mode Contrast enhance Sharpness enhance

SH-REMOTE button 2 zone (P6302E)
SH-REMOTE button 3 zone (P6303E)
SH-REMOTE button 4 zone (P6304E)

WARNING: Setting the Mute option causes the detector to stop responding to activations. To recover from Mute option, you may have to wait up to 30 minutes (supervision interval), or activate the detector tamper before the detector un-mutes. Consider clearing 'Zone is active' under 'options A (P6122)' instead.

Timers (P144E, P145E, P146E & P163E)

Arm Entry Delay

Stay Entry Delay

Re-Trigger Count

Sensor-Watch Timer

Reporting (P147E, P157E, P158E, P159E & P160E)

Report Using This Area

Input CID Code

Unverified CID Code

Verified CID Code

Voice Message Number

SIA Reporting Codes (P196E)

Select

Armed Alarms to Output (P128E)

Output 1 Output 2 Output 3 Output 4 Output 5 Output 6 Output 7 Output 8 Output 9 Output 10 Output 11 Output 12 Output 13 Output 14 Output 15 Output 16 Output 17 Output 18 Output 19 Output 20 Output 21 Output 22 Output 23 Output 24 Output 25 Output 26 Output 27 Output 28 Output 29 Output 30 Output 31 Output 32

Stay Alarms to Output (P129E)

Unverified Alarms to Output (P167E)

Verified Alarms to Output (P168E)

24Hr Alarms to Output (P130E)

Chime Activation to Output (P131E)

Tamper Alarms to Output (P132E)

Arm Beeps to Keypad (P134E)

Keypad/Reader 1 Keypad/Reader 2 Keypad/Reader 3 Keypad/Reader 4 Keypad/Reader 5 Keypad/Reader 6 Keypad/Reader 7 Keypad/Reader 8 Keypad/Reader 9 Keypad/Reader 10 Keypad/Reader 11 Keypad/Reader 12 Keypad/Reader 13 Keypad/Reader 14 Keypad/Reader 15 Keypad/Reader 16 Keypad/Reader 17 Keypad/Reader 18 Keypad/Reader 19 Keypad/Reader 20 Keypad/Reader 21 Keypad/Reader 22 Keypad/Reader 23 Keypad/Reader 24 Keypad/Reader 25 Keypad/Reader 26 Keypad/Reader 27 Keypad/Reader 28 Keypad/Reader 29 Keypad/Reader 30 Keypad/Reader 31 Keypad/Reader 32

Stay Beeps to Keypad (P135E)

24Hr Beeps to Keypad (P136E)

Chime Beeps to Keypad (P137E)

Tamper Beeps to Keypad (P139E)

Wireless Supervise Beeps to Keypad (P140E)

Sensor Watch Beeps to Keypad (P141E)

Arm Entry Beeps to Keypad (P142E)

Stay Entry beeps to Keypad (P143E)

Arm Entry Beeps to Output (P161E)

Stay Entry Beeps to output (P162E)

Access Control Options (P6174E, P6175E & P6176E)

Link Input to Output

Access Input type

Access options (P6176E)

Report Input# as Output# Hide Input on Status & Control Page Input Restore Resets Egress Outputs

Inputs